GoR 84: Return of the Geek

Gears of Resistance #84 for April 21, 2018 http://greenshoegarage.com/podcast/GOR/2018/GOR_0084_21APR18.mp3 This week we cover: IoT and Cybersecurity FTC Lets You Fix Your Stuff Without Voiding Your Warranty Ultrasonic Hacking Google AIY Let’s You Play With Neural Networks Nintendo Labo: Physical Meets Virtual Intel Shutting Down Group Behind AR Goggles Wearable Solar Cells 3D Product Fabrication All-In-One…

Read More

We’re Not Dead Yet!

The rumors of my death are greatly exaggerated!  But….. We have sunset STEAM Power Podcast, or rather it will be subsumed into Gears of Resistance as a segment on that show.  In short, life got nuts and I needed to consolidate to stay sane. Also, I was getting tired of doing things I felt were…

Read More

Writing Arduino Code using Visual Studio and Visual Micro

Gears of Resistance Special for May 30, 2017 In this video we look at jumping up from the standard Arduino IDE and take a stab at programming use Microsoft’s Visual Studio Community Edition 2017 and third-party extension Visual Micro. We also look at how to put our code under source code control using GitHub. Some…

Read More

3D Printable Enclosure Design with Fusion 360

Gears of Resistance Special for May 24, 2017 In the previous two videos was we talked about the workflow for taking an Eagle PCB board file and using the OtherMill Pro to make a circuit board.  Then we took tat same Eagle board file and moved it into Fusion 360 to begin making an enclosure….

Read More

3D Printed Enclosures with EagleCAD and Fusion 360

Gears of Resistance Special for May 19, 2017 Last time we talked about the workflow for taking an Eagle PCB board file and using the OtherMill Pro to make a circuit board.  This week we show how to use the same Eagle board file to build a 3D printable enclosure in Fusion 360. Some of…

Read More

GoR 26: OtherMill and Eagle for PCB Milling

Gears of Resistance Episode 26 for April 22, 2017 This week we talk about the workflow for taking an Eagle PCB board file and using the OtherMill Pro to make a circuit board.  We also visit our brand new Hobby Lobby.  Links for the things we talk about are below: Autodesk Eagle OtherMachine Co. Eagle…

Read More

GoR 25: Podcast Studio in a Box

Gears of Resistance Episode 25 for February 24, 2017 For more tech news and how-to’s follow along on Google+ and check out our YouTube Channel. Music is “Computer Control” by Tom Woxom, available at http://freemusicarchive.org/ CC: Attribution-Noncommercial-NoDerivatives 4.0 International Today’s podcast is brought to you by audible.com. They have over 180,000 titles to choose from for…

Read More

GoR 24: Battery Box, DIY Light Filter, and Foamy Fun

Gears of Resistance Episode 24 for February 12, 2017 Cheap foam board storage DIY Battery Box | Based on Power Pods from QuickSilverRadio $2 Camera Light Filters Camera Slider For more tech news and how-to’s follow along on Google+ and check out our YouTube Channel. Music is “Computer Control” by Tom Woxom, available at http://freemusicarchive.org/ CC:…

Read More

GoR 23: LED Lights, Altoid Tins, and the End of the DMCA

Gears of Resistance Episode 23 for November 6, 2016 Battery Powered LED Light Strip You Can Now Legally Hack Your Own Stuff (Changes to the DMCA Go In Effect) For more tech news and how-to’s follow along on Google+ and check out our YouTube Channel. Music is “Computer Control” by Tom Woxom, available at http://freemusicarchive.org/ CC:…

Read More

GoR 22: 3D Printing + Woodworking and OSHW News

Gears of Resistance Episode 22 for October 8, 2016 Divorce Averted: Arduino.cc and Arduino.org Make Nice Arduino ESLOV | Kickstarter ESP 32 Stuff | 2 | 3  |  GitHub IoT Botnet For more tech news and how-to’s follow along on Google+ and check out our YouTube Channel. Music is “Computer Control” by Tom Woxom, available at http://freemusicarchive.org/ CC:…

Read More